China EV-ONE AC EV Charger | 3.5KW-22KW Wallbox & Floor Mounted Charging Station from Suppliers & Factory
⚡ Core Product Specifications
- Regional Standards Compatibility: GB (China), IEC (Europe), UL (North America), JIS (Japan), and Tesla versions available
- Power Options: 3.5KW, 7KW, 11KW, 21KW (22KW for IEC standard)
- Mounting Types: Wall-mounted (wallbox) and floor-mounted (freestanding)
- Core Functions: Plug & Charge, RFID card start/stop, RFID card billing, networked QR code charging
- User-Friendly Design: Optional 4.3-inch LCD display for real-time status; max output of 7kW per hour for single gun.
🌟 Key Features
1. Intuitive Monitoring: 4.3-inch LCD & LED indicators for clear status.
2. Smart Connectivity: Ethernet & 4G for remote control and cashless payments.
3. Comprehensive Safety: Protection against over/under voltage, short circuits, and lightning.
4. Intelligent Diagnostics: On-board storage and fault diagnosis for easy maintenance.
5. High Precision: Grade 1.0 energy meter for accurate billing.
6. All-Weather: IP54 rating for indoor and outdoor durability.
7. Easy Operation: Low-cost maintenance and intuitive daily use.
8. Anti-Theft: Integrated design to prevent unauthorized removal.
📦 Product Components
The EV-ONE AC EV Charger kit includes:
- Main charger unit
- Mounting backplate
- Charging gun and cable
- Full installation accessory kit
📊 Technical Specifications
| Parameter Item | Unit | Standard Value |
| Product Name | - | EV-ONE AC Electric Vehicle Charger |
| AC Input Voltage | V | GB: AC220V±20% / AC380V±20%; IEC: AC230V±20% / AC400V±20%; UL: AC240V±20% |
| AC Power Frequency | Hz | 50Hz±1Hz |
| Maximum Output Power | KW | GB: 7KW/21KW; IEC: 7KW/22KW; UL: 7KW/11KW |
| Rated Output Current | A | GB: 32A/32A*3; IEC: 32A/32A*3; UL: 32A/48A |
| Residual Current Device (RCD) | mA | ≤30mA (Type A) |
| Ingress Protection (IP) Rating | - | IP54 |
| Energy Meter Grade | - | ≥1.0 Class |
🔍 Component Breakdown
- 1. 4-M6×15 stainless steel screws
- 2. Fixed mounting plate
- 3. Mounting backplate
- 4. Card swiping area (optional)
- 5. Authorized charging function
- 6. LED status indicators
- 7. Charging gun
- 8. Charging cable
- 9. TYPE2 AC inlet
- 10. M3.5×20 securing screws
- 11. M10×60 expansion bolts
- 12. Column mounting base
🛠️ Floor-Mounted Installation Guide
Concrete Foundation: Pour a C25 grade concrete foundation (400×250mm), 40cm below and 20cm above ground.
Column Securing: Fasten the mounting column to the foundation using 4×M10×60 expansion bolts.
Backplate Installation: Attach the mounting backplate to the column using M6×15 screws.
Wiring Connection: Route input cable through conduit; connect L (live), N (neutral), and PE (earth) terminals.
Grounding Verification: Ensure the device is reliably earthed to meet safety standards.
❓ Frequently Asked Questions
Q1: Which EV standards does this charger support?
A: It is compatible with GB (China), IEC (Europe), UL (North America), JIS (Japan), and Tesla standards.
Q2: Can this unit be installed outdoors?
A: Yes, the charger features an IP54 waterproof and dustproof rating, making it suitable for both indoor and outdoor environments.
Q3: What are the available power output options?
A: We offer multiple power configurations including 3.5KW, 7KW, 11KW, and 21KW/22KW to suit different vehicle requirements.
Q4: Does the charger support remote management?
A: Yes, it supports Ethernet and 4G connectivity, allowing for remote control, status monitoring, and QR code payments.
Q5: What safety protections are built into the device?
A: It includes comprehensive protection against over-voltage, under-voltage, over-current, short circuits, residual current (RCD), over-temperature, and lightning.
Q6: How can users start a charging session?
A: Users can start charging via Plug & Charge, RFID card swiping, or by scanning a QR code through the networked system.